mtm tiguan 550x356 MTM  Cantronic for 2.0 TDI

MTM Cantronic for 2.0 TDI

The newest development from Motoren Technik Mayer GmbH once again places more emphasis on results versus mere appearances. The engine specialist from Wettstetten, Germany offers its newly developed MTM M-Cantronic, as an alternative to the new programming of the original engine control unit, enticing better performance and torque out of Volkswagen’s current diesel engines.

With a further alternative, the F-Cantronic, MTM lays a hand on the electronically controlled suspension height. Both variations are immediately available. Further possible applications of the MTM Cantronic such as a removal of the V-max limitation are currently being developed.

The M-Cantronic is an electronic device altering the engine maps of the ECU three-dimensionally. MTM exploits the full potential of previously unused power reserves. Instead of generally raising the fuel pressure by a certain percentage and thereby possibly damaging the engine, MTM takes a softer approach. The Cantronic takes engine speed into consideration in performance optimization. It taps the RPM values from the CAN-bus (Controller Area Network), and, dependent on this, varies fuel and boost pressure. With this complex modification, the M-Cantronic offers all the advantages a conventional chip-tuning has, yet providing further amenities.

In comparison to a re-programmed original engine control unit, the M-Cantronic can be built in by customers themselves or from a garage and just as simple and in an uncomplicated manner, removed again. Following a new re-programming by MTM and an eventually necessary replacement of cable harness, the M-Cantronic may be further utilized in other vehicles. It therefore offers a better suited solution for customers that often exchange their vehicles providing convenient replacement and simple self-assembly. Given the current ecological debate, MTM pays special attention to the particle filter. In spite of a noticeable increased performance, the M-Cantronic has no negative consequences for its function and effectiveness. Even if a garage installs a software update for the engine control unit, the Cantronic remains unaffected.

MTM offers the M-Cantronic inclusive of TÜV-parts certificate and EMC-testing.

M-Cantronic for the new VW Tiguan
VW Tiguan 2.0 TDI: The new VW Tiguan 2.0 TDI is also one of the first models that MTM provides with more power through its M-Cantronic. The result is 132 kW (180 hp) at 4100 rpm and powerful 360 Nm at 2500 rpm. For a further ounce of performance caters a new exhaust system with two double-end tailpipes. MTM is just preparing the total power hammer: a modified turbocharger and specially tuned exhaust system together with the Cantronic generate breathtaking 210hp. Better braking performance guarantees a new braking system with choice of either 330, 365 or 380 mm brake discs. Agile driving characteristics are achieved by MTM suspension springs or optionally an adjustable coilover suspension. Ultimately, wheels in format 8,5×19“ ET50 or an even mightier 9×20“ ET44 complete the refined appearance of the Tiguan.

mtm cantronic MTM  Cantronic for 2.0 TDI


In the Volkswagen Group, there are several vehicles equipped with electronic air suspension. Again here the MTM Cantronic hooks up into CAN-Bus data stream. The electronic lowering in the form of the F-Cantronic will soon be available for the current models Audi A6, Allroad, A8 and Q7, Bentley Continental GT, Continental GTC and Flying Spur, VW models Touareg and Phaeton as well as the Porsche Cayenne.

All Cantronic variations can be ordered for immediately. The complete delivery of a Cantronic consists of the Cantronic module itself, a vehicle-specific cable harness, instructions, TÜV-approval and original MTM logo in chrome. Both Cantronic variations are available from MTM importers as well as MTM´s online shop.

Further information about the extensive automotive technology program of MTM for vehicles of the Audi – Volkswagen Group can be found on the internet at www.mtm– or by telephone 049-841-98188-88.

pinit fg en rect gray 20 MTM  Cantronic for 2.0 TDI

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.